Technician- Maintenance II (controls)

Recruiter
First Solar
Location
Dong Nam
Salary
Competitive
Posted
12 Oct 2018
Closes
25 Oct 2018
Ref
REQ-003107
Sector
Renewables
Contract Type
Permanent
Hours
Full Time
Our high growth and leadership position in the renewable energy business offers outstanding opportunities to individuals seeking an exciting work environment in one of the most important industries for the 21st century. First Solar is a leader in the development and manufacturing of thin film solar modules used in grid-connected solar power plants, as well as a provider of complete solar generation solutions for U.S. utilities. Our culture is one where teamwork, continuous improvement, achievement of results, and environmental responsibility are core values. We are seeking new associates who are motivated to contribute their talents to making cost-effective solar energy an important part of the world's energy mix.
-
Primary Job Functions:
Experience:
  • Minimum 5 years and above in a maintenance technical environment.
  • Has Leadership or previous technical supervisor experience.
  • Maintenance experience with Thin film or Vacuum Technology is preferred.

Education:
  • Diploma in electrical, mechanical, electromechanical or electronics.

Required Skills/Competencies:
  • Good communication in English and Vietnamese.
  • Proficient use of all Microsoft Office suite programs
  • Proven Leadership Skills and ability to work independently with very less supervision.
  • Knowledge of manufacturing equipment.
  • Ability to read prints and suggest modifications as required.
  • Knowledge of Electrical, Mechanical, Vacuum Systems and Robotic.
  • Ability to follow Safe Work Practices.
  • Capable of following LOTO
  • Ability to work with little supervision.
  • Demonstrated troubleshooting skill.
  • Able to complete at least 90% of the Schedule PM's
  • Must be capable of entering data or pass downs into/from the CMMS system and for internal candidates, must be capable of pulling reports and entering data or pass downs into/from the CMMS/Maximo system.

Essential Responsibilities:
  • Accomplishes daily assignments as scheduled and as directed.
  • Performs the on-site service and repair of equipment.
  • Must meet at least 90% of Estimated Repair Times
  • Interfaces with other departments.
  • Follows standard OSHA, EPA and Company safe practices on all work assignments.
  • Identifies and recommends opportunities for cost savings.
  • Able to fill in the position of Team Lead whenever required and delegate task accordingly.
  • Must be able to train, coach and supervise Technician I & II in related job field.
  • Must able to read electrical & mechanical drawings and technical manuals.
  • Ability to interpret technical manuals details during trouble shooting/repairing of manufacturing equipment
  • Responsible to manage waste generated from any work that is performed.
  • This includes but is not limited to:
    • Remove hazardous waste HEPA filters / pre filters and put in proper bags and clean up the area after work is done.
    • Transport the hazardous waste HEPA filters / pre filters with proper bags to WWT. Contact WWT Associates when dropping off the filters.
    • Move full waste drums back to WWT and make sure drum is properly labeled and dated. Drum cannot be over 882 lbs. Work with WWT Associates and/or EHS to make sure the drum is properly labeled.
    • Responsible for adherence to all safety procedures, good housekeeping standards, and the wearing of PPE.
    • Notify EHS Department if there are questions or concerns with the management of hazardous waste.
  • Performs other assignments as required.

Reporting Relationships:
  • N/A

Travel:
  • Up to 10 % of global travel is expected.

Physical Requirements:
  • Able to perform normal physical movements (e.g. standing & sitting for a long period, lifting, carrying and climbing) according to EHS ergonomic guidelines.
  • Will sit, stand or walk short distances for up to 12 hours per day.
  • Will climb stairs on an occasional basis.
  • Will lift up to 23 kg on an occasional basis, according to Minister of Health guidelines
  • Will lift up to 17 kg on a frequent basis, according to Minister of Health guidelines
  • Will push or pull up to 13 kg of force on an occasional basis.
  • Will push or pull up to 5 kg of force on a frequent basis.
  • Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis.
  • May reach above shoulder heights and below the waist on a frequent basis.
  • May stoop, kneel, or bend, on an occasional basis.
  • 20/40 vision in each eye (with or without correction) and the ability to distinguish between red, yellow and green is required.
  • Must be able to comply with all safety standards and procedures.
  • Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, protective jacket or apron and arm guards).
  • All associates working on the production floor may be required to wear a respirator at any given time and thus, the ability to wear a respirator is a condition of employment and continued employment (requires little or no facial hair).

Potential candidates will meet the education and experience requirements provided on the above job description and excel in completing the listed responsibilities for this role. All candidates receiving an offer of employment must successfully complete a background check and any other tests that may be required.
-
Language Requirements
English (Required), Vietnamese (Required)-
Experience
Relevant work experience-
Education
Diploma: Mechanical Engineering (Required)-
Potential candidates will meet the education and experience requirements provided on the above job description and excel in completing the listed responsibilities for this role. All candidates receiving an offer of employment must successfully complete a background check, pre-employment drug screen, and any other test that may be required for the role.

Similar jobs

Similar jobs