Automation Engineer

Shanghai, SHANGHAI
04 Oct 2016
25 Dec 2016
Oil and Gas
Contract Type
Full Time
JobID :   20651BR

  Candidate shall have at least 5 years experience in Design and Application engineering of DCS for power plant or related field, should have hands on experience in following areas.
应聘者需要至少5年的电厂及相关行业DCS 的设计及应用经验
  • Preparation of SAMA / Functional logic diagrams using VISIO/Auto Cad.用Visio 或 Auto Cad制图工具软件画SAMA图及逻辑框图
  • Functional Design, Development and testing of control logic on DCS platform. DCS experience is the necessary运用DCS 平台软件进行控制逻辑功能的设计,完善及测试工作,必须具有DCS的工 作经历
  • Controller and IO allocation based on functional segmentation guidelines and Control panel cabinet engineering.根据控制功能要求在控制机柜内进行DCS控制器及IO 信号的合理分配设计
  • Developing /updating of project related documents based on design updates.对项目设计中涉及的更改,需要及时更新相关的项目设计文档
  • Preparation of Control System Requirements and Test procedures.准备系统需求文档及相关的测试要求步骤
  • Participate in technical meeting with Project lead to understand Requirement/scope of work/schedule and Quality requirements.与项目负责人一起参与技术讨论会并了解项目的需求,需要执行的范围,项目计划 及质量的要求
  • Creation of configuration documentation for third party interfaces using MODBUS/PROFIBUS protocols.基于Modbus/Profibus 协议要求为通讯的第三方编写通讯配置文档
  • Configuration and Application programming of Performance Calculation Module /package as part of DCS systems used for Fossil based or Nuclear Power Plant.能对用于燃煤机组和核电机组的设备在DCS控制平台上进行组态和配置

Job Requirements
Candidates having relevant experience of at least 5 years on above area and worked on Performance calculation packages of reputed DCS vendors will be preferred.5年以上的工作经验中最好由上述提到的相关工作经验 ,并曾使用过知名DCS厂家 的性能计算包
  • Should be familiar with Field Devices such as Transmitter, Control Valves, MCC fed Motors/Heater, HT switchgear and their interfaces with DCS.熟悉现场设备如变送器,控制阀,马达和加热器的驱动柜, 开关设备及它们与 DCS的接口
  • Familiarity with various modules of the Performance Calculation package like Unit heat rate, Turbine Heat Rate, Turbo generator Heat balance, Boiler/Economizer/feed water Performance Module, Fan /large pump performance module and Cooling Tower Module etc. will be preferred. 熟悉或了解各种性能计算的模型如 加热器,汽机,涡轮发电机,锅炉,给水,风 扇,大型泵和冷却塔的性能模型。
  • Should have exposure on Deployment of Enterprise Data Integration Software on Server, and Its interface with DCS/PLC's using standard third party interface protocols like Modbus, GSM ,OPC.具有在厂级数据通讯的经验,并能使用通讯协议如Modbus, GSM ,OPC来实现与 DCS和PLC实现通讯
  • Exposure to development of communication interface driver for third party system will be preferred.最好具有与第三方通讯的研发经验
  • Familiarity with Hazard and Risk assessment SIL analysis is a plus.最好能熟悉危险的,并能做技术风险的TUV SIL评估
  • Design and Execution ( SIF/SIS development, Preparation of Safety Requirement specification and SIL Verification) 最好设计过并有工作经验在 SIF/SIS 的设计,安全需求的整理编写和SIL 论证
  • Familiar with tools like failure mode effect analysis(FMEA) and cause and effect diagrams (C&E diagrams) is a plus. 最好熟悉失效模式(FMEA)计算 并熟悉失效的根源和有效的框图分析 (C&E 框 图)
  • Installation and Commissioning. 具有安装调试的经验
  • Candidates shall have bachelors degree in I&C engineering , Candidates having working experience with engineering consulting firms or large EPC/OEM companies and hands on experience on Ovation (Emerson DCS) for power plant platform will be preferred.具备仪表,控制类的本科学历 ,并在工程顾问公司或大型的 EPC /OEM 公司工作的 经历,最好具有Ovation 电厂控制平台的经验