Lead Mechanical Commissioning Engineer

03 Oct 2016
01 Dec 2016
Oil and Gas
Contract Type
Full Time
The mechanical commissioning process engineer performs on hand job the cold and hot communication activities for
WSC/BOP and STG in a safe manner. The ComE is responsible for the preparation and execution of the commissioning, trial
run, acceptance testing and inspection/measurements within his/her scope of work defined by the Com Manager.
He Shall have minimum 5 x years' experience in Mechanical commissioning.

Essential Responsibilities

• All commissioning activities - cold and hot -are performed according to Manuals, and Quality procedure.
• The personnel assigned to him/her are fully acquainted with the site specific rules, safety regulations and
environmental protection measures and that they perform their work accordingly.
• Be able to do instrument Calibration - Thermocouples, RTD's, Pressure and Temperature transmitters, level
transmitters, etc.
• Be able to do pneumatic and hydraulic valves commissioning.
• Be able to do signal loop checks from field to DCS marshalling
• Be able to read and understand PFUP's, SEL, SPL, logics. Etc
• Be able to understand ALSPA PFUP's and work in coordination with I&C
• Be able to understand electrical MCC SLD and understand protection settings (LV Only)
• Be able to do electrical commissioning works like motor and cable meggering for drives and actuators
• Be able to set electrical motorized valves, drives - AUMA, Rotork, etc-
• Be able to do cold and hot commissioning of the systems like flushing, start up preparation, simulation, and
protection checks
• Be able to assist the turnover TOP engineer in system walk downs
• Be able to work indendently with their own hands on any system allocated by the lead or COMM
• Be able to work as per Alstom Porcedures ITP, ITPL, and liaise with Client to exhibite, demonstrate witness point
• Be able to work in flexible timings as and when required
• All available tools and aids are utilized in order to achieve the goals of his/her assignment and, as well, to strive for
continuous product improvements and cost reduction.
• All activities not identified in the standard or specific commissioning procedures are carried out under PTW,
according the site regulations.
• When acting in the role of Authorised person PTW process, he is responsible for securing and confirming all TIP
• Deviations from the agreed goals are reported and that corrective measures are initiated by arrangement with, and
with the support of, the COMM.
• A performance feedback of all employees assigned to him/her is made to the COMM
• Commissioning is performed in a safe and timely manner.
• Prepare for commissioning as specified in the work instructions.
• Manage, perform, coordinate and monitor the commissioning of the specified systems by arrangement with the
• Developing commissioning plans, testing procedures, protocols, and reports for the equipment's for STG
equipment's and auxiliaries.
• Organise and supervise the safe operation of the plant (site rules, safety regulations, shift plan, shift log, etc.) from
system turnover from erection until PAC by arrangement with the COMM.
• Facilitate the turnover of systems from erection to commissioning and from commissioning to the customer in
accordance with current procedure/work instruction by arrangement with the COMM.
• Perform commissioning according to the specifications and engineering documents, taking into account the safety
instructions, site regulations, environmental protection measures and local regulations.
• Ensure that the engineering department is involved in handling technical problems and decisions by arrangement
with the COMM.
• Ensure the commissioning, operation, quality record and feedback documentation are issued.
• Hand over the commissioning, quality and feedback documentation and software (originals) with a document list to
the COMM for compiling and release.
• Ensure that technical deviations are reported with a corresponding non-conformance report (NCR) and that the
same are followed up until their completion.
• Keep a diary to record daily work, occurrences, problems, special information, etc. plus a list of pending items.
• Maintain logbooks to record commissioning and operational events as specified in the work instructions by
arrangement with the COMM.
• Manage the handling and inspection of the commissioning test equipment.


Mandatory (MUST)
• University degree or technical qualification in Mechanical engineering field.
Fluent in spoken and written English.
• EHS passport ABEC + AIEP
Desirable (NICE TO HAVE)
• Bachelor / Master degree in engineering related field
Behavioral and/or Technical Know-how
Experience gained on the job during professional life
Mandatory (MUST)
• Rigorous
• Tenacious
• Enthusiastic
• Ability for team work
• Leadership

Desired Characteristics

• For his scope of work execute tasks according to the MTS/STS/CMS
• For his scope of work, complete all quality documentation, properly and during commissioning activities (ITPL,
SWCF, test certificates...)
• Employee People management cycle properly followed
Strong dedication to reach the project objectives
• Very good team spirit
• Able to handle the pressure