CNC Machinist III

Recruiter
Location
Schriever, Louisiana
Salary
Competitive
Posted
06 Dec 2016
Closes
12 Jan 2017
Ref
6236667
Sector
Oil and Gas
Contract Type
Permanent
Hours
Full Time
JOB SCOPE:
To operate automatic turning equipment to its maximum and produce parts which are in tolerance of all prints.  Generally run parts which are of more critical nature.  To assist programmer and to set up and fully maintain turning equipment.  Generally can run 1 or more different types N.C. equipment with different controller.  May be required to run 2 at the same time.
DUTIES & RESPONSIBILITIES:
Must be able to load and download programs, select proper tooling and grades.
Must tool up machine, incorporate fixtures and or jigs for special jobs.
Proof out programs and make necessary corrections.
Make adjustments on feeds and speeds.
Perform all daily maintenance as well as troubleshoot problems, mechanical and minor electrical with the assistance of an electrician.
Alter programs as needed with approval of Programmer / Coordinator.
Work with programmer to improve parts.
Must perform in process inspection of parts during batch runs.
Capable of doing all math including basic shop geometry and trigonometry.
Must run machine unsupervised.
Must run all parts which are of tight tolerance, generally these pars have a tolerance of + .002 and in some cases + .0005.
Must be able to run more than one piece of equipment, as production requires.

Must furnish calibrated measurement instruments required by Weatherford for this position as per the attached listing.
Maintain neat housekeeping.
Work assignments carried out to the highest quality level.
Perform various other duties and activities as assigned by supervisor within the physical constraints of the job.
Must be able to load and download programs, select proper tooling and grades.
Must tool up machine, incorporate fixtures and / or jigs for special jobs.
Proof all programs and make necessary corrections.
Make adjustments of feeds and speeds.
Perform all daily maintenance as well as troubleshoot problems mechanically and minor electrical with the assistance of an electrician.
After programs as needed with approval of Programmer / Coordinator.
Work with Programmer to improve parts.
Must perform in process inspection of all parts during batch runs.
Capable of doing all math including basic shop geometry and trigonometry.
Must run machine unsupervised.
Must run all parts which are of tight tolerance such as R.D. prototypes, various items that have a tighter tolerance such as + .002 and in some cases + .0005.
Must be able to run more than one piece of equipment as production requires.
Must furnish calibrated measurement instruments required by Weatherford for this position as per the attached listing.
Maintain neat house keeping.
Work assignments must be carried out to the highest quality level.
Must follow all safety rules and company policies of Weatherford.
Must comply with all requirements of Weatherfords Quality System Manual, Quality Procedures Manual, and Department Operating Procedures.
Perform various other duties required by supervisor within the physical constraints of the job. 
QUALIFICATIONS
 SKILLS & QUALIFICATIONS:
Must be able to read blueprints.
Must be able to use all machinist devices and hand tools.
Capable of doing all math including basic shop geometry and trigonometry.
Ability to understand and proof out G-coded programs, as well as conversational programs along with some programming as needed.
Minimum 3-6 years experience on numerical controls.
The physical ability to immediately respond to emergency situations.